CONNECTICUT STATUTES AND CODES
               		Sec. 9-248. Furnishing of supplies.
               		
               		
               	 	
               	 	               	 	
               	 	
               	 	
               	 		
      Sec. 9-248. Furnishing of supplies. When a voting machine is purchased or leased 
or otherwise provided for use in any municipality, the Secretary of the State shall prepare 
or approve samples of the following printed matter and supplies and shall furnish one 
of each to the officials of such municipality who have so provided such machine in 
accordance with the provisions of section 9-238: (1) Directions for testing and preparing 
the voting machines for the election; (2) one certificate on which the mechanic can 
certify that he has properly tested and prepared the machine for the election; (3) one 
certificate on which some person other than the mechanic who prepared the machine 
can certify that the machine has been examined and found to have been properly prepared 
for the election; (4) one certificate on which can be certified that party watchers have 
witnessed the testing and preparing of the machines; (5) one certificate that the machines 
have been delivered to polling places in good order; (6) one card for each polling place, 
stating the penalty for tampering with or injuring a voting machine; (7) two seals for 
sealing the machine; (8) one envelope in which the keys to the machine can be sealed 
and delivered to the election officials, such envelope to have printed or written thereon 
the designation and location of the voting district in which the machine is to be used, 
the number of the machine, the number shown on the protective counter thereof after 
the machine has been prepared for the election and the number or other designation on 
such seal as the machine is sealed with, such envelope to have attached to it a detachable 
receipt for the delivery of the keys to the voting machine to the election officials; (9) 
one envelope in which the keys to the voting machine can be returned by the election 
officials after the election; (10) one card stating the name and telephone number and 
address of the mechanic on the day of the election; and (11) a report of an inspection 
of the machines by the moderator, registrars and checkers, which inspection shall be 
made before the opening of the polls. The municipal clerk shall, for each election, prepare 
and furnish said supplies for each voting machine, in conformity with said samples. The 
municipal clerk shall also prepare and furnish to the election officials tally and return 
blanks containing the names of all candidates for office on the official ballots, in such 
manner as may be directed by the Secretary of the State, except that all blanks furnished 
by said secretary throughout the state shall be uniform in their printing.
      (1949 Rev., S. 1197, 1202; 1953, S. 725d; 1957, P.A. 561, S. 10.)
               	 	
               	 	
               	 	               	 	
               	 	               	 	               	  
               	 
               	 
               	 
               	 
            Connecticut Forms by Issue
      			
               	 			               	 		
               	 		
               	 		               	 		Connecticut Law
               	 		
      				            			Connecticut State Laws
            			            			
            			            			
            			            			
            			            			Connecticut Court
            			            			
            			            			Connecticut Agencies