controls, switchgear, inverter, and other interface devices.
(6) "Excess customer-generated electricity" means the amount of customer-generatedelectricity in excess of the customer's consumption from the customer generation system during amonthly billing period, as measured at the electrical corporation's meter.
(7) "Fuel cell" means a device in which the energy of a reaction between a fuel and anoxidant is converted directly and continuously into electrical energy.
(8) "Governing authority" means:
(a) for a distribution electrical cooperative, its board of directors; and
(b) for each other electrical corporation, the Public Service Commission.
(9) "Inverter" means a device that:
(a) converts direct current power into alternating current power that is compatible withpower generated by an electrical corporation; and
(b) has been designed, tested, and UL certified to UL1741 and installed and operated inaccordance with IEEE1547 standards.
(10) "Net electricity" means the difference, as measured at the meter owned by theelectrical corporation between:
(a) the amount of electricity that an electrical corporation supplies to a customerparticipating in a net metering program; and
(b) the amount of customer-generated electricity delivered to the electrical corporation.
(11) "Net metering" means measuring the amount of net electricity for the applicablebilling period.
(12) "Net metering program" means a program administered by an electrical corporationwhereby a customer with a customer generation system may:
(a) generate electricity primarily for the customer's own use;
(b) supply customer-generated electricity to the electrical corporation; and
(c) if net metering results in excess customer-generated electricity during a billing period,receive a credit under Section 54-15-104.
(13) "Switchgear" means the combination of electrical disconnects, fuses, or circuitbreakers:
(a) used to:
(i) isolate electrical equipment; and
(ii) de-energize equipment to allow work to be performed or faults downstream to becleared; and
(b) that is:
(i) designed, tested, and UL certified to UL1741; and
(ii) installed and operated in accordance with IEEE1547 standards.
Amended by Chapter 302, 2010 General Session